Wismec Sinuous FJ200 200W Kit with Divider Tank

Sold Out
Out of stock

Wismec Sinuous FJ200 200W Kit with Divider Tank


Product Information

Here comes the Wismec Sinuous FJ200 200W Kit. The kit includes a 200W Wismec Sinuous TC Box Mod and a Wismec Divider Atomizer. It is very compact and ergonomic to fit comfortably in the hand and carry around, measuring 45mm by 29mm by 123.4mm.

Wismec Sinuous FJ200 TC Box Mod, powered by a built-in 4600mAh battery, outputs power researching up to 200W, which brings you amazing vaping experience. With 2A maximum charging current, the mod can be fully charged quicker than normal ones. It supports bigger tanks up to 28mm diameter and packs with the 1.3-inch OLED screen to presents all parameters clearly. Under the VW/TC-Ni/TC-Ti/TC-SS/TCR mode, its temperature range is 200℉- 600℉/ 100℃- 315℃(TC Modes). The resistance range is 0.05ohm - 1.5ohm(TC Modes) and 0.1-3.5ohm(VW Mode). The fire button and green responsive indicator light also make Sinuous FJ200 much fashionable and portable. The flip-open bottom cover with ventilation holes is designed for easier cells replacement and better heat dissipation. Dual Circuit Protection: Two sets of circuit protection system are applied, realizing the overall protection of over-charging, over-current and over-discharging. If you get stuck while upgrading, just press the right regulatory button and then insert into the reset hole with a needle to restart. The upgrade-able firmware is in 4 colors -blue, bronze, black, red.

Wismec Divider Tank is an upgraded version after Wismec Elabo SWand. The drip tip is made from Polyoxymethylene(POM), characterized by its high strength, hardness and rigidity. You can adjust the airflow by rotating the control ring only. The Divider Tank features a twist-open top filling design. Its very convenient to fill the juice. Simply slide the top cap, you can finish the refilling quickly and easily. The filling hole on the rubber plug is quite big to avoid excessive juice out of the hole. Divider Tank packs with spare glass tube made from Pyrex for best heat dissipation. It comes with 2ml and 4ml juice capacity for greater e-liquid capacity. The pre-installed WS01 Triple 0.2ohm head produces huge cloud and intense flavor. It features the WS Coil with traditional cotton and signature CCELL Ceramic in different resistances. Moreover, Wismec Divider Tank has an advanced adjustable bottom airflow control. 

Quick Links:

Starter kits

Wismec E-Cig

Wismec Sinuous FJ200 200W Kit

Wismec Sinuous FJ200 TC Box Mod

Wismec Divider Tank 2ml & 4ml

High Grade E-Liquid

E-Cig Batteries

Wismec Sinuous FJ200 200W Kit with Divider Tank image 1


§   200W maximum output

§   Innovative temperature protection system for safe charging

§   Centered 510 spring loaded connector

§   4600mAh built-in battery with 200W max output

§   1.3inch large display with 2A quick charge

§   Powerful WS series coils & 2ml/4ml options


Wismec Sinuous FJ200 200W Kit with Divider Tank image 2







45.0mm x 29.0mm x 123.4mm

Output Wattage

1W - 200W

Output Mode


Resistance Range

0.05ohm - 1.5ohm(TC Modes), 0.1-3.5ohm(VW Mode)

Temperature Range

200- 600/ 100- 315(TC Modes)


Blue, Bronze, Black, Red












2ml, 4ml

Thread Type

510 Spring Loaded Connector




Wismec Sinuous FJ200 200W Kit with Divider Tank image 3

Package Included

§   1 x Sinuous FJ200

§   1 x Divider

§   1 x WS01 Triple 0.2ohm Head

§   1 x WS02 Triple 0.25ohm Head

§   1 x QC USB Cable

§   1 x Warranty Card

§   2 x User Manual

§   1 x Spare Part(2 x seal ring + 1 x glass tube)

Wismec Sinuous FJ200 200W Kit with Divider Tank image 4

Write Your Own Review
You're reviewing:Wismec Sinuous FJ200 200W Kit with Divider Tank
Your Rating

18+ / 21 +

Are you of legal age at your area to purchase vaping products?

© 2013-2020 Shenzhen AVE40 E-Commerce Co., Ltd. All Rights Reserved.